Millipore CTGR75S01 Aervent CTGR Cartridge Filter 5 in. 0.2 µm Code 7 PTFE
Specifications
| All Returns Accepted | ReturnsNotAccepted |
| Brand | Millipore |
| MPN | CTGR75S01 |
MSRP: $440 Overview: DescriptionCatalogue NumberCTGR75S01Trade NameAerventDescriptionAervent CTGR Cartridge Filter 5 in. 0.2 µm Code 7Product InformationDevice ConfigurationCartridgeMaximum Differential Pressure, bar (psid)Forward: 5.5 bar (80 psid) @ 25 °C; 1.8 bar (25 psid) @ 80 °C. Reverse: 4.1 bar (60 psid), intermittentMaximum Inlet Pressure, bar (psi)Forward - 5.5 bar (80 psi) @ 25 °C; 1.7 bar (25 psi) @ 80 °C; Reverse - 4.1 bar (60 psi), IntermittentCartridge CodeCode 7Quality LevelMQ400Biological InformationMediaAerventSterilization150 (100 forward/50 reverse) SIP cycles of 30 min @ 145 °CBacterial Grow-ThroughRetains Brevundimonas diminuta liquid aerosol for 21 days at a minimum challenge of 10⁷ CFU/cm²Bacterial RetentionSamples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm² using ASTM F838 methodology.WettabilityHydrophobicPhysicochemical InformationPore Size0.2 µmBubble Point at 23 °C≥1100 mbar (16 psig) nitrogen with 70/30 % IPA/waterGravimetric ExtractablesThe extractables level was equal to or less than 35 mg per 10-inch cartridge after 24 hours in a 70/30% IPA/water mixture at controlled room temperature.HydroCorr≤0.38 mL/min @ 2.6 bar (38 psig) per 5 in cartridgeNitrogen Diffusion at 23 °C≤12 mL/min @ 970 mbar (14 psig) in 70/30 % IPA/waterNon-Fiber ReleasingThis product was manufactured with a PTFE membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).Virus Aerosol RetentionRated for aerosol retention of a total challenge of 108–1010 plaque forming units of ΦX-174 virus particles at 85 Nm3/h (50 SCFM) per cartridge.USP Bacterial EndotoxinsAqueous extraction contains <0.25 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) TestDimensionsCartridge Nominal Length5 in. (13 cm)Diameter6.9 cm (2.7 in.)Filtration Area0.32 m²Device Size5 in.Materials InformationChemistryPolytetrafluoroethylene (PTFE)Device MaterialPolypropyleneSeal MaterialSilicone (SI)Support MaterialPolypropylenePackaging InformationMaterial Size1Material PackageDouble Easy-Open bag PLEASE CHECK OUR OTHER ITEMS FOR SALE AND CONTACT US FOR A DISCOUNT ON MULTIPLE PURCHASES! Our items are excess inventory acquired from company mergers, closures and laboratory acquisitions.We have a warehouse full of new and used business and laboratory equipment, electronics, motors, measuring devices, consumables, etc. that we’re slowly adding to our Ebay page.We’ll be happy to send you an Excel sheet with all current inventory. We try our best to provide an accurate description of each item we list but please contact us if you have any questions at all before purchase. Items have not been tested, unless otherwise stated.If there are multiple quantities of an item listed, the item you receive might not be the exact one in the picture above. Important disclaimer: You are buying items which can be used in chemical and laboratory processes which are potentially dangerous. It is your sole responsibility as the buyer to judge the safety of a given procedure and to assess the compatibility of any lab items with the given procedure and as such the seller shall not be held liable for damage, injury, or any other loss that may occur from the use of any product purchased. By your purchase of this item you are agreeing to hold harmless the Seller and eBay in any event of accident, injury, damage, or loss that may arise, under any circumstance, from use of said items. Please inspect all equipment for damage upon receipt and prior to use. We can offer no warranties, expressed or implied, as to the suitability of these products for any given use.