1pcs Dental Surgident Bone Expander Kit Surg ical Tool Spreading Split
1pcs Dental Surgident Bone Expander Kit Kit includes:1pcs – Ridge Split Chisel 5pcs – Expander Drillis: Ø1.8-2.5mm; Ø2.0-3.0mm, Ø2.5-3.5mm, Ø2.8-4.0mm, Ø30-45mm 1pcs – Wrench Ratchet 2pcs – Saw Discs: Ø7.0mm and Ø9.0mm, thickness 0.25mm 1pcs – Guide Drill Ø2.0mm 1pcs – Handpiece extension tool 3pcs – Spreading pins 3pcs – Spreading Adapters 1pcs – NLBC Drill Ø5.0mm1.8-2.5mm; 2.0-3.0mm; 2.5-3.5mm; 2.8-4.0mm; 3.0-4.5mmDSI BMS Kit allows you to insert several implants at the same time by widening the narrow bone ridge. By using the spreading pins you will be able to expand the bone evenly without any complications. Unlike any other technique, this one will give you the best results with minimal trauma to the patient. The procedure will pass smoothly, easily and fast with the DSI Bone Spreading Kit. DSI BMS Kit also includes a ridge split chisel for high-density bone and overall more difficult procedures when higher force should be applied. The chisel is used for crestal ridge augmentation to increase bone support for implant insertion. It enables the insertion of an implant at the time of augmentation avoiding the delay to permit consolidation of a graft. The chisel can be used in conjunction with screw-type bone expanders to facilitate bone manipulation. All the instruments are made of high-quality stainless steel. They are designed with increased durability, exceptional corrosion resistance, and stability during the procedure. This kit is all you need for any bone expansion and several implant installation procedures. The recommended technique (using bone spreader pins):After reclining the gingival flap, use the contouring bur to smooth the ridge if necessary.Cut the bone part that implants will be placed using a saw disk.Spread the bone initially using a chisel.Insert the spreading pins between cut bone halves side by side.Connect the spreading adapter with inserted spreading pins and turn.Spreading pins can be turned either with a hand or with a ratchet wrench using the adapter.Turn the pins one by one slowly and expand the ridge evenly.After completing the expansion, remove spreading pins and place the fixtures.*Please Note: When the expansion is completed, place the fixtures one by one while exchanging the pins, not removing all spreading pins at once. Perform bone grafting between and around placed fixtures. The recommended technique(with osteotomy drill-type expanders):After reclining the gingival flap, use the contouring bur to smooth the ridge if necessary.Cut the bone part that implants will be placed using a saw diskMark the initial holes with a pilot drill.You may use the IPO Guide Kit to plan the best position.Place the expander drill and turn it in a sequential way for smooth and even expansion.Insert the same size of the expander, moving up with diameter, and expand the ridge evenly.After completing the expansion, place the fixture.Perform bone grafting between and around placed fixtures. Features:Safely and rapidly widen the narrow bone ridge. A unique system that allows you to insert several implants at once. Simple and intuitive surgical system. Precise and predictable results with minimal effort. Compact and complete, no need for additional tools or units. Minimal trauma for simultaneous implant placement. Made from the highest quality materials, Saves chair time and effort. Thin solid spreading pins will expand properly and easily. The drills are color-coded. Reduces the overall treatment and healing time. Split and Expanded bone provides a sufficient supply of bone-forming cells for quicker integration. Initial implant stability by providing a larger space.LOT IS FOR 1 SURGIDENT BONE EXPANDER KIT
1pcs Dental 3D CAD/CAM Conical Connection RP Analog Impl ant
1pcs Dental 3D CAD/CAM Conical Connection RP Analog DSI Analog 3D has a self-centering installation, no risk of displacement in the model, and the ability to torque the prosthetic screw to 15Ncm on the model. Both intraoral scanning and conventional impressions are possible methods for a digital workflow. Analog 3D for Printed Models is the best analog system specifically designed for 3D-printed models. Advantages:Connection – Conical Connection 2.65mm.Precise installation.Secure press-fit in the model.One insertion position.Automatically centered.Material – Stainless Steel.Country of Manufacture – Israel. LOT IS FOR 1 3D CAD/CAM ANALOG RP
1pcs Dental Driver For Compressive Multi Unit M1.7 Fixture Monoblock Insertion
Driver For Compressive Multi Unit M1.7 Fixture. Material: Stainless steel.
1 pcs Dental Hand Hex Driver 1.25mm For Adapter Head Screw Tools Stainless Steel
1 pcs Dental Hand Hex Driver For 1.25mm Tools Fixation Ratchet Fixture Fixation Ratchet Drivers are used to tighten fixtures with great precision or remove an fixture system by hand. The ratchet driver is made as a stainless steel monoblock. It makes it very durable and convenient to work with. Compatible with conical connection implants DSL, DESS, ADIN, A.B, N0BEL ACTIVE, etc. The driver is intended for the conical connection fixture RP regular platform 4.3-5.0mm. The drivers are created universally and allow the connection of a ratchet with a square head 4.0mm or a hex 6.35 mm to choose from. The driver can be reused, autoclaved, and stored for a long time. Our precise tools are both extremely durable and easy to use. we know how important it is to properly place fixtures and tightening them is essential to success. Features:Full solid highest quality stainless steel body.Exceptional steady grip for maximum accuracy.Incredibly tight hex to fixture seal.The unmatched quality, durability, and corrosion resistance. THE LOT IS FOR 1 HEX DRIVER FOR 1.25MM OF SELECTED HEIGHT
1 pcs Dental Hex Driver For 2.42mm Internal Hex Surg ical Tools Fixation Ratchet
1 pcs Dental Hex Driver For 2.42mm Internal Hex Surg ical Tools DSI Implant Fixation Ratchet Drivers are used to tighten implants with great precision or remove an implant system by hand. The DSI ratchet driver is made as a stainless steel monoblock. It makes it very durable and convenient to work with. The driver is intended for the internal Hex connection of the 2.42mm Implant. DSI drivers are created universally and allow the connection of a ratchet with a square head 4.0mm or a hexagon 6.35mm to choose from. Lengths 7mm / 10mm / 15mm, please choose the length of your driver! Compatible with the most popular systems such as Alpha Bio, Zimmer, MIS, Adin, Implant Direct, AB Dental. The driver can be reused, sterilized in an autoclave, and stored for a long time. Our precise tools are both extremely durable and easy to use. At DSI we know how important it is to properly place implants and tightening them is essential to success. Features:Full solid highest quality stainless steel body.Universal Ø6.35 and Ø4.0mm wrench ratchet connection system.Exceptional steady grip for maximum accuracy.Incredibly tight hex to implant seal.The unmatched quality, durability, and corrosion resistance.THE LOT IS FOR 1 HEX DRIVER FOR 2.42MM INTERNAL HEX
1pcs Dental Impression Coping Transfer For Ball Attach ment Lab Prosthetic
1pcs Dental Full Im plantion Kit Surg ical Tools Driver Bur Instrument
1pcs Dental Full Im plantion Kit. Lindemann Bur. The Professional Surgical Kit – a new kit from DSI for dental professionals. 1pcs – Torque Ratchet Driver for Prosthetic 10-35Ncm. 1pcs – Surgical Torque Ratchet Driver 25-100Ncm.
1 pcs Dental Tap Screw Extractor Drill Surg ical Tools Burs
A reverse drill that rotates counter-clockwise makes a slot in the screw body and Tap Screw Extractor Drill tries to extract it. It was carefully developed for urgent cases of a screw. THE LOT IS FOR 1 TAP SCREW EXTRACTOR DRILL.
1pcs Dental Dentaurum Palatal Expansion Screw Straight Hyrax Click RPE Orthodont
1pcs Dental Dentaurum Palatal Expansion Screw Straight Hyrax Click RPE OrthodontThe minimal dimensions of the hyrax expansion screw are ideal for small palates. Many innovative construction details make their use even easier, safer, and more effective.Features: Stabile guidance – Optimal design of guide pins. Solid-body – High stability even when fully activated. Easy bending-Break-resistant retention legs. Little space is needed to bend legs due to the stepped screw body.Laser marking – Directional arrow and maximum expansion. Stops – Prevent screws from coming apart.Advantages:RPE screw with a click feature to prevent unwanted turning back.For effective and reliable rapid palatal expansion using fixed appliances.Optimal screw locking during the active treatment phase.Built-in stops prevent the screws from coming apart once maximum expansion has been obtained.Reliable activation/deactivation of the screw with a perceptible click after a 1/4 turn.No accidental turning back when pulling out the safety key during activation.Minimal dimensions with maximum expansion range.A permanently laser-marked arrow on the body of the screw indicates the opening direction and max expansion.THE LOT IS FOR 1 DENTARUM EXPANSION SCREW
1pcs Dental Analog Technical Handle For Internal Hex 2.42mm Tools Impl ant
1pcs Dental Analog Technical Handle For Internal Hex 2.42mm Analog handle for standard platform implants and abutments system with internal hex 2.42mm. DSI hand analog makes your work easier in a way you can only imagine, no more wasting time, no more non-handy models, and no more messy and hard work. Compatible with AB, Alpha bio, MIS, Adin, Cortex, Surcam, paltop, zimmer. DSI hand analog can be used not only by a lab technician, but a dentist can also use it as well before insertion it into a patient’s mouth. You can check it to be one hundred percent sure that it will be stable in the implant. Very convenient and easy to use. DSI hand analog does it in one single step, take the abutment or a healing cap, custom abutment that you have just made, and just screw it in our analog, it is a matter of seconds, and let’s not forget that the analog is long and made with grip stripes on it, so you can hold it tight and enjoy working with it. Diameter of internal hexagon 2.42 mm. Compatible with all types of abutments that match the 2.42 mm hexagon – universal hexagon. The handle is made of the highest quality stainless steel and provides a stable and comfortable grip while working. LOT IS FOR 1 ANALOG TECHNICAL